Hp Procurve 2520-24-poe User Manual

Posted on by
PrintRate this content
2520-24-poe

Hp Procurve Switch

Hp Procurve Switch 2510g-48 Manual Product detail -:HP 2620 Switch Series Includes features, specifications and on the HP 2620-24-PoE+ and HP 2620-48-PoE+ Switches conserve energy. SSH on HP Networking Switches is based on the OpenSSH software toolkit. Hp ProCurve 2520G-24-PoE Pdf User Manuals. View online or download Hp ProCurve 2520G-24-PoE Planning And Implementation Manual, Installation And Getting Started Manual. View and Download HP ProCurve 2520-24-PoE specifications online. ProCurve 2520 Switch Series. ProCurve 2520-24-PoE Switch pdf manual download. Also for: Procurve 2520-8-poe, Procurve 2520g-8-poe, Procurve 2520g-24-poe.

Hp Procurve 2520-24-poe User Manual 2016

HP ProCurve 2520G-8-PoE Switch (J9298A)

Click here to view the physical specifications for the HP ProCurve 2520G-8-PoE Switch.

Click here to view the environmental specifications for the HP ProCurve 2520G-8-PoE Switch.

Click here to view the power specifications for the HP ProCurve 2520G-8-PoE Switch.

Click here to view the technical specifications for the HP ProCurve 2520G-8-PoE Switch.

Physical specifications for the HP ProCurve 2520G-8-PoE Switch
Description
15.95 x 25.4 x 4.45 cm (6.28 x 10 x 1.75 in) (1U height)
1.66 kg (3.66 lb) including power adapter and power cord

  • Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rack-mounting kit available)

  • Horizontal surface mounting

  • Wall mounting

Environmental specifications for the HP ProCurve 2520G-8-PoE Switch
Description
0° to 45°C (32° to 113°F)
15% to 95% @ 40°C (104° F), non-condensing
-40ºC to 70ºC (-40ºF to 158ºF)
15% to 95% @ 65ºC (149ºF), non-condensing
EN 60068 (IEC 68)
up to 3 km (10,000 ft)
Power: 0 dB, Pressure: 0 dB
Power specifications for the HP ProCurve 2520G-8-PoE Switch
Description
100-240 Vac
1.5 A
9.4 W
86.2 W
67 W
50/60 Hz
93.9 kJ/hr (89 BTU/hr)
NOTE: Idle power is the actual power consumption of the device with no ports connected.Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.PoE Power is the total power budget available to all PoE ports.Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE, 100% traffic, and all ports plugged in.
Technical specifications for the HP ProCurve 2520G-8-PoE Switch
Description

  • Freescale PowerPC 8313 @ 266 MHz

  • 32MB flash

  • 128MB DDR2 SDRAM

  • packet buffer size: 512 KB dynamically allocated

100 Mb Latency:
1000 Mb Latency:
Throughput:
Switching capacity:
MAC address table size:
Ports

  • 8 RJ-45 auto-sensing 10/100 PoE ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3af PoE)

  • Media Type: Auto-MDIX

  • Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only

  • 2 dual-personality ports

  • Each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a SFP slot (for use with SFP transceivers)

  • 1 RJ-45 serial console port

  • HP ProCurve Manager Plus

  • HP ProCurve Manager

  • Command-line interface

  • Web browser

  • Configuration menu

  • Out-of-band management (serial RS-232C)

  • IEEE 802.3 Ethernet MIB

  • Repeater MIB

  • Ethernet Interface MIB

HP ProCurve 2520G-24-PoE Switch (J9299A)

Click here to view the physical specifications for the HP ProCurve 2520G-24-PoE Switch.

Click here to view the environmental specifications for the HP ProCurve 2520G-24-PoE Switch.

Click here to view the power specifications for the HP ProCurve 2520G-24-PoE Switch.

Click here to view the technical specifications for the HP ProCurve 2520G-24-PoE Switch.

Physical specifications for the HP ProCurve 2520G-24-PoE Switch
Description
24.61 x 44.3 x 4.45 cm (9.69 x 17.44 x 1.75 in) (1U height)
3.27 kg (7.21 lb)

  • Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rack-mounting kit available)

  • Horizontal surface mounting

  • Wall mounting

Environmental specifications for the HP ProCurve 2520G-24-PoE Switch
Description
0° to 50°C (32° to 122°F)
15% to 95% @ 40°C (104° F), non-condensing
-40ºC to 70ºC (-40ºF to 158ºF)
15% to 95% @ 65ºC (149ºF), non-condensing
EN 60068 (IEC 68)
up to 3 km (10,000 ft)
Power: 28.3 dB, Pressure: 37.7 dB; DIN 45635T.19 per ISO 7779
Power specifications for the HP ProCurve 2520G-24-PoE Switch
Description
100-127/200-240 Vac
3.3/1.6 A
21.8 W
260.4 W
195 W
50/60 Hz
235.27 kJ/hr (223 BTU/hr)
NOTE: Idle power is the actual power consumption of the device with no ports connected.Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.PoE Power is the total power budget available to all PoE ports.Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE, 100% traffic, and all ports plugged in.
Technical specifications for the HP ProCurve 2520G-24-PoE Switch
Description

  • Freescale PowerPC 8313 @ 266 MHz

  • 32MB flash

  • 128MB DDR2 SDRAM

  • packet buffer size: 512KB dynamically allocated

100 Mb Latency:
1000 Mb Latency:
Throughput:
Switching capacity:
MAC address table size:
Ports

  • 20 RJ-45 auto-sensing 10/100 PoE ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3af PoE)

  • Media Type: Auto-MDIX

  • Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only

  • 4 dual-personality ports

  • Each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a SFP slot (for use with SFP transceivers)

  • 1 RJ-45 serial console port

  • HP ProCurve Manager Plus

  • HP ProCurve Manager

  • Command-line interface

  • Web browser

  • Configuration menu

  • Out-of-band management (serial RS-232C)

  • IEEE 802.3 Ethernet MIB

  • Repeater MIB

  • Ethernet Interface MIB

Safety and emission certificates

Description

  • cUL (CSA 22.2 No. 60950)

  • CE Labeled

  • UL 60950-1

  • UL Listed

  • CAN/CSA 22.2 No. 60950

  • EN 60825

  • AS/NZS 60950

  • IEC 60950-1

  • EN 60950-1

  • FCC part 15 Class A

  • VCCI Class A

  • EN 55022 Class A

  • CISPR 22 Class A

  • ICES-003 (Canada)

  • AS/NZS CISPR 22

  • IEC/EN 61000-3-2

  • IEC/EN 61000-3-3

  • IEC 61000:4-2, 4-3, 4-4, 4-5, 4-6, 4-8, 4-11

Generic:
EN:
ESD:
Radiated:
EFT/Burst:
Surge:
Conducted:
Power frequency magnetic field:
Voltage dips and interruptions:
Harmonics:
Flicker:

Standards and protocols

Description

  • RFC 1591 DNS (client)

  • SSHv1/SSHv2 Secure Shell

  • IEEE 802.1D MAC Bridges

  • IEEE 802.1p Priority

  • IEEE 802.1Q VLANs

  • IEEE 802.1s Multiple Spanning Trees

  • IEEE 802.1w Rapid Reconfiguration of Spanning Tree

  • IEEE 802.3 Type 10BASE-T

  • IEEE 802.3ab 1000BASE-T

  • IEEE 802.3ad Link Aggregation Control Protocol (LACP)

  • IEEE 802.3af Power over Ethernet

  • IEEE 802.3x Flow Control

  • RFC 768 UDP

  • RFC 783 TFTP Protocol (revision 2)

  • RFC 792 ICMP

  • RFC 793 TCP

  • RFC 826 ARP

  • RFC 854 TELNET

  • RFC 868 Time Protocol

  • RFC 951 BOOTP

  • RFC 1350 TFTP Protocol (revision 2)

  • RFC 1542 BOOTP Extensions

  • RFC 2030 Simple Network Time Protocol (SNTP) v4

  • RFC 2131 DHCP

  • RFC 3376 IGMPv3 (host joins only)

  • RFC 1981 IPv6 Path MTU Discovery

  • RFC 2460 IPv6 Specification

  • RFC 2925 Remote Operations MIB (Ping only)

  • RFC 3315 DHCPv6 (client only)

  • RFC 3513 IPv6 Addressing Architecture

  • RFC 3596 DNS Extension for IPv6

  • RFC 4022 MIB for TCP

  • RFC 4113 MIB for UDP

  • RFC 4251 SSHv6 Architecture

  • RFC 4252 SSHv6 Authentication

  • RFC 4253 SSHv6 Transport Layer

  • RFC 4254 SSHv6 Connection

  • RFC 4293 MIB for IP

  • RFC 4419 Key Exchange for SSH

  • RFC 4443 ICMPv6

  • RFC 4861 IPv6 Neighbor Discovery

  • RFC 4862 IPv6 Stateless Address Auto-configuration

  • RFC 1213 MIB II

  • RFC 1493 Bridge MIB

  • RFC 2021 RMONv2 MIB

  • RFC 2613 SMON MIB

  • RFC 2618 RADIUS Client MIB

  • RFC 2620 RADIUS Accounting MIB

  • RFC 2665 Ethernet-Like-MIB

  • RFC 2668 802.3 MAU MIB

  • RFC 2674 802.1p and IEEE 802.1Q Bridge MIB

  • RFC 2737 Entity MIB (Version 2)

  • RFC 2863 The Interfaces Group MIB

  • IEEE 802.1AB Link Layer Discovery Protocol (LLDP)

  • RFC 1098 A Simple Network Management Protocol (SNMP)

  • RFC 2819 Four groups of RMON: 1 (statistics), 2 (history), 3 (alarm) and 9 (events)

  • SNMPv1/v2c/v3

  • RFC 2474 Diffserv precedence, with 4 queues per port

  • RFC 2475 DiffServ Arch

  • itectureRFC 2597 DiffServ Assured Forwarding (AF)

  • RFC 2598 DiffServ Expedited Forwarding (EF)

  • IEEE 802.1X Port Based Network Access Control

  • RFC 1492 TACACS+

  • RFC 2138 RADIUS Authentication

  • RFC 2866 RADIUS Accounting

  • Secure Sockets Layer (SSL)

Link to product Overview and QuickSpecs

Click here to view product overview .

Click here to view product QuickSpecs.

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.

Procurve

Provide feedback

Please rate the information on this page to help us improve our content. Thank you!
  1. Was the information on this page helpful?
Please wait while we process your request.