1. User Manual Ilive Clock Radio For Ipod And Iphone Ipb101b Screen
2. Ihome Clock Radio For Ipod
3. User Manual Ilive Clock Radio For Ipod And Iphone Ipb101b Price
4. User Manual Ilive Clock Radio For Ipod And Iphone Ipb101b Free

USER’S GUIDE

V:1021-1214-09

ICP310B

ILive Owners Manuals, User Guides, Instructional Help Documents & Information. User-manual-Clock Radio for iPhone/iPod ICP200B Manual. Jun 29, 2014. ILive Clock Radio for iPod and iPhone - Stream music wirelessly from your device to the clock radio for unrivaled control of your listening experience.

Wake to iPod, iPhone, radio or alarm. When you wake, iPod or iPhone will be charged and ready to go. Auto Time Sync means you never set your clock again! First data fd 410 user manual. The clock automatically sets every time you dock your iPod or iPhone. Special Gift from iLive Electronics Get a IAB53W Wireless Bluetooth Receiver and Adapter FREE with the purchase of this. 3 Connect the iPhone or iPod to the connector inside the Dock for iPhone/iPod. When the speaker is plugged in, using AC power, the docked iPhone or iPod will charge. Playing an iPhone/iPod. 1 Follow the instructions for docking an iPhone/iPod. 2 Press the POWER button to turn the clock radio on. 3 Press the SOURCE button to switch to iPod mode. View and Download ILive ICP310B user manual online. Clock Radio for iPhone/iPod. ICP310B Clock Radio pdf manual download.

Clock Radio for iPhone/iPod

For the most up-to-date version of this User’s Guide, go to www.ilive.net

•CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

•WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

•AVERTISSEMENT: Pour réduire le risque d’incendie ou de choc électrique, ne pas exposer cet appareil sous la pluie et l’humidité.

•CAUTION: Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure.

•WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

•WARNING: Do not place the unit on top of any soft, porous, or sensitive surfaces to avoid damaging the surface. Use a protective barrier between the unit and surface to protect the surface.

•WARNING: Use of this unit near fluorescent lighting may cause interference regarding use of the remote. If the unit is displaying erratic behavior move away from any fluorescent lighting, as it may be the cause.

•CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

•PRÉCAUTION: Danger d’explosion si les piles sont remplacées de façon incorrect. Remplacer les piles seulement par le même type de pile ou l’équivalent.

•WARNING: There is a danger of explosion if you attempt to charge standard Alkaline batteries in the unit. Only use rechargeable NiMH batteries.

•WARNING: The remote control’s button cell battery contains mercury. Do not put in the trash, instead recycle or dispose of as hazardous waste

•WARNING: Lithium batteries, like all rechargeable batteries are recyclable and should be recycled or disposed of in normal household waste. Contact your local government for disposal or recycling practices in your area. They should never be incinerated since they might explode.

Main plug is used as disconnect device and it should remain readily operable during intended use.

Do not mix old and new batteries.

Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries.

No mezcle baterías viejas y nuevas.

No mezcle baterías alcalinas, estándar (carbono-zinc) o recargables (ni-cad, ni-mh, etc.).

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated 'dangerous voltage' within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

This product utilizes a Class 1 laser to read Compact Discs. This laser Compact Disc Player is equipped with safety switches to avoid exposure when the CD door is open and the safety interlocks are defeated. Invisible laser radiation is present when the CD Player’s lid is open and the system’s interlock has failed or been defeated. It is very important that you avoid direct exposure to the laser beam at all times. Please do not attempt to defeat or bypass the safety switches.

1.Read these Instructions.

2.Keep these Instructions.

3.Heed all Warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with a dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two blades with one wider

than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.

12.Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

FCC Warnings

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

Additional Warnings

•The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus.

L’appareil ne doit pas être exposé aux écoulements ou aux éclaboussures et aucun objet ne contenant de liquide, tel qu’un vase, ne doit être placé sur l’objet.

•Main plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected form the mains socket outlet completely.

La prise du secteur ne doit pas être obstruée ou doit être facilement accessible pendant son utilisation. Pour être complètement déconnecté de l’alimentation d’entrée, la prise doit être débranchée du secteur.

•Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

Les piles ne doivent pas être exposées à de forte chaleur, tel qu’à la lumière du soleil, au feu ou autres choses de semblable.

•Caution marking is located at the bottom of the apparatus.

Les marquages sont inscrits en bas de l’appareil.

•The marking information is located at the bottom of apparatus.

Les précautions d’emploi sont inscrites en bas de l’appareil.

Features

•Works with iPhone

•Made for iPod

•AM/FM radio

•Station memory presets (20AM and 20FM)

•Dual alarms

•Digital clock

•Snooze

•Sleep timer

•Wake to iPhone/iPod, radio, or buzzer

•Gradual wake

•Line input (3.5mm)

•Video output

•Subwoofer output

•Preset EQ

•Last channel memory

•Basic iPhone/iPod controls

•Built-in speakers

•0.9” white LCD display

•Supports universal docking brackets

•Cloth speaker grill

Included

•ICP310B

•AC/DC power adapter

•Docking brackets for iPhone/iPod (5)

•AM loop antenna

•AC power: requires AC/DC power adapter (included)

•Battery backup: requires 2 AAA batteries (not included)

TABLE OF CONTENTS

INTRODUCTION

SETUP

CLOCK

IPHONE/IPOD

RADIO, INPUTS, & OUTPUTS

COMPANY INFORMATION

DISPLAY

RESET

Press using a paperclip or like object to reset the clock radio to it’s original settings.

Power

Plug the AC/DC power adapter (included) into the DC POWER INPUT and a standard AC power outlet to power the clock radio.

Battery Backup

Requires 2 AAA batteries (not included)

User Manual Ilive Clock Radio For Ipod And Iphone Ipb101b Screen

AM Loop Antenna

Plug the AM Loop Antenna (included) into the AM ANTENNA INPUT to receive AM radio reception.

Setting the Clock

1Press the POWER button to turn the clock radio off.

2Press and hold the CLOCK SET button.

3While holding the CLOCK SET button, press the HOUR and MIN buttons to adjust the hour and minute.

4After the desired time is set, release the CLOCK SET button to finish setting the time.

Setting the Alarm

1Press the POWER button to turn the clock radio off.

2Press and hold the AL1 or AL2 buttons.

3While holding the AL1 or AL2 buttons, press the HOUR and MIN buttons to adjust the hour and minute.

4After the desired alarm time is set, release the AL1 or AL2 buttons.

5Press the AL1 or AL2 buttons to adjust the alarm source between BUZZER, RADIO, iPod, or OFF.

CLOCK

Setting the Sleep Timer

1With the clock radio powered on and playing, press the SNOOZE button repeatedly to set the sleep timer.

2After the set amount of time has expired the clock radio will automatically power off.

Docking an iPhone/iPod

1Locate the numbered bracket that fits the iPhone/iPod model that will be docked.

Each included bracket has a number on it, indicating which iPhone/iPod model that bracket is compatible with. See the separate bracket chart page to identify which bracket is needed.

2Snap the bracket into place over the iPhone/iPod connector in the dock for iPhone/iPod.

3Connect the iPhone or iPod to the connector inside the Dock for iPhone/iPod.

When the speaker is plugged in, using AC power, the docked iPhone or iPod will charge.

Playing an iPhone/iPod

1Follow the instructions for docking an iPhone/iPod.

2Press the POWER button to turn the clock radio on.

3Press the SOURCE button to switch to iPod mode.

4Press the PLAY/PAUSE button to begin playing music from the docked iPhone or iPod.

Playing the AM/FM Radio

1Press the POWER button to turn the clock radio on.

2Press the SOURCE button to switch to AM or FM radio mode.

3Press the TUNING buttons to adjust the AM or FM radio station.

Saving an AM/FM Radio Station

1Follow the instructions for PLAYING THE AM/FM RADIO.

2Press the TUNING buttons to tune to the desired station.

3Press and hold the MEM/DIM button.

4Press the TUNING buttons to select a memory preset.

5Press the MEM/DIM button to save the current station to the select memory preset.

Playing a Preset Radio Station

1Follow the instructions for PLAYING THE AM/FM RADIO and SAVING AN AM/FM RADIO STATION.

2Press the M- and M+ buttons to cycle through preset radio stations.

Subwoofer Output

Requires a RCA audio cable (not included)

1Connect a RCA audio cable to the

SUBWOOFER OUTPUT ont he clock radio and an input on a subwoofer.

RADIO, INPUTS, & OUTPUTS

Line Input

Requires a 3.5mm line input cable (not included).

1Connect a line input cable to the LINE INPUT and an MP3 player.

2Press the POWER button to turn the clock radio on.

3Press the SOURCE button to switch to AUX mode.

4Use the native controls on the connected MP3 player to play audio through the clock radio.

Video Output

Requires a RCA video cable (not included).

1Follow the instructions for DOCKING AN iPhone/iPod and PLAYING AN iPhone/iPod.

2Make sure “TV Out” is set to “On” in the video settings of the docked iPhone or iPod.

3Connect a RCA video cable to the VIDEO OUTPUT on the clock radio and a video input on a television.

4Adjust the television to the correct input setting.

5Videos played through the docked iPhone or iPod will now play on the connected television.

Green Initiative

Environmental Commitment to ‘Protect for Today and Sustain for Tomorrow’

2009 marks the official launch of DPI, Inc.’s corporate campaign for a greener and cleaner world. DPI and its four brands, iLive, WeatherX, Capri, and GPX, are building upon environmental initiatives introduced at all of their facilities to help formulate and sustain significant and important conservation efforts within its manufacturing and marketing communities. In addition to targeting and selecting energy efficient product features, and structuring ‘green office’procedures, other initial program efforts include:

•Reduction of all packaging sizes

•Recyclable plastics for clamshell packages, with a plan to eventually replace plastic with recyclable paper

•Recycled fiber board in place of the polyfoam in packing boxes

•Recycled plastics in place of the virgin material in product construction

International Support

To download this User’s Guide in English, Spanish, or French, visit the support section at www.ilive.net.

Para transferir esta guía de usuario en inglés, español, o francés, visite la sección de la ayuda en www.ilive.net.

Pour télécharger ce guide de l’utilisateur en anglais, espagnol, ou français, visitez la section de soutien chez www.ilive.net.

Contact Information

Address: 2116 Carr Street, St. Louis MO, 63106

Phone: 1-314-621-2881

Fax: 1-314-588-1805

Email: customerservice@ilive.net

Parts Email: partsinfo@dpi-global.com

Website: www.ilive.net

© 2009 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specifications are subject to change without notice

For the most up-to-date version of this User’s Guide, go to www.ilive.net

Warningsand Precations

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated 'dangerous voltage' within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

This product utilizes a Class 1 laser to read Compact Discs. This laser Compact Disc Player is equipped with safety switches to avoid exposure when the CD door is open and the safety interlocks are defeated. Invisible laser radiation is present when the CD Player’s lid is open and the system’s interlock has failed or been defeated. It is very important that you avoid direct exposure to the laser beam at all times. Please do not attempt to defeat or bypass the safety switches.

Important Safety Instructions

1.Read these Instructions.Canon ixus 980 is user manual.

2.Keep these Instructions.

3.Heed all Warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with a dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.

12.Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Additional Warnings

•The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus.

L'appareil ne doit pas être exposé aux écoulements ou aux éclaboussures et aucun objet ne contenant de liquide, tel qu'un vase, ne doit être placé sur l'objet.

Ihome Clock Radio For Ipod

•Main plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected form the mains socket outlet completely.

La prise du secteur ne doit pas être obstruée ou doit être facilement accessible pendant son utilisation. Pour être complètement déconnecté de l'alimentation d'entrée, la prise doit être débranchée du secteur.

•Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

Les piles ne doivent pas être exposées à de forte chaleur, tel qu'à la lumière du soleil, au feu ou autres choses de semblable.

•Caution marking is located at the bottom of apparatus.

Les précautions d'emploi sont inscrites en bas de l'appareil.

•The marking information is located at the bottom of apparatus.

Les marquages sont inscrits en bas de l'appareil.

FCC Warnings

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

Product Information

██Features

•Dock plays and charges iPhone and iPod

•AM/FM radio with digital tuning

•Intelli Set™ auto clock set

•Dual alarm

•Digital clock

•Remote

•Digital volume control

•Preset EQ settings

•Auxiliary input for iPod shuffle and other audio devices

•Gradual wake

•Wake to iPod, radio, or buzzer

•Snooze function

•Sleep function

•Battery backup

•0.8” LCD display with white backlight

•AC power

•Includes: AC/DC adapter, remote control, docking brackets for iPod

██What’s In the Box

•IC689B

•AC/DC Adapter

•Remote Control

•Docking Brackets for iPod

Powering the Unit & REmote

██ AC/DCAdapter

Use the AC/DC Adapter to connect the unit to a standard AC Outlet.

██ Battery Backup

Requires 1 CR2032 Battery. (pre-installed)

Please note, the Battery Backup is meant for short term unexpected power outages. It will only preserve the time and alarm times. None of the other playback functions will work solely off of the backup battery power.

To access the backup battery, use a phillips head screwdriver to remove the battery compartment door.

Only replace with an equivalent battery type

██Remote Batteries

Requires 1 CR2025 Battery. (pre-installed)

Only replace with an equivalent battery type

PUSH

Clock Operations

██Setting the Clock Using IntellSEt™

1.When the unit is first powered on, the time will automatically be set to Eastern Standard Time.

2.Press the Power Button to turn the unit off.

3.Press and hold the Time Zone Button.

4.While holding the Time Zone Button, press the Hour/Minute Buttons on the unit to adjust the time zone.

Refer to the Time Zone Chart to find your specific time zone.

██ Manually Setting the clock

1.Press the Power Button to turn the unit off.

1.Press and hold the ClockAdjust Button.

2.While holding the ClockAdjust Button, press the Hour/Minute Buttons to adjust the hour and minute.

A PM Indicator will appear on the display when the time is set in the PM.

3.After the correct time is set, release the ClockAdjust Button to finish setting the clock.

██ Setting theAlarms

1.Press the Power Button to turn the unit off.

2.Press and hold the Alarm 1 Button or

Alarm 2 Button.

3.While holding the Alarm 1 or 2 Button press the Hour/Minute Buttons to adjust the alarm time.

4.While holding the Alarm 1 or 2 Button press the Source Button to adjust the alarm source. (iPod, Radio, or Buzzer)

5.Release the Alarm 1 or 2 Button to finish setting the alarm.

6.Press the Alarm 1 or 2 Button to activate or deactivate alarm 1 or 2.

Alarm & SleePOperations

██ Setting the SleepTimer

1.Adjust a docked iPod to the desired track, album, or playlist, or adjust the AM or FM radio to the desired station.

2.Press the Sleep Button repeatedly to cycle through the available sleep times (90, 80, 70, 60, 50, 40, 30, 20, or 10 minutes.)

3.When the sleep timer is set, “SLP” will appear on the display.

4.After the set amount of time has expired, the unit will power off.

iPod Operations

██ Dockingan iPod/iPhone

1.Locate the numbered bracket that fits the iPod or iPhone that will be docked.

Each included Bracket has a number on it, indicating which iPod or iPhone model that bracket is compatible with.

•See the separate bracket chart page to identify which bracket is needed.

2.Snap the bracket into place over the iPod Connector in the dock.

3.Connect the iPod or iPhone to the iPod Connector inside the dock.

When the unit is plugged in, using AC power, the docked iPod or iPhone will charge.

██Playingan iPod/iPhone

Follow the directions for docking an iPod or iPhone.

1.Press the Power Button to turn the unit on.

2.Press the Source Button to switch to iPod Mode.

3.Press the Play/Pause Button to begin playing audio from a docked iPod or iPhone.

██ Tuning theAM or FM radio

1.Press the Power Button to turn the unit on.

2.Press the Source Button to switch to

Radio Mode.

3.Press the AM/FM Button to switch between AM or FM radio mode.

•Press the Tune Buttons to adjust the AM and FM radio station when in Radio Mode.

Press and hold the Tune Buttons to scan for the next available AM or FM radio station.

██SavinganAM or FM Radio Station to the Unit’s Memory

4.Tune to the desired AM or FM radio station.

5.Press the Memory Button on the remote.

6.Press the Memory Up/Down Buttons to select a memory slot to save the current radio station to.

7.Press the Memory Button on the remote, to save the current AM or FM station to the selected memory slot.

Up to 20 AM and 20 FM radio stations can be saved to the unit’s memory at one time.

██SelectingaSavedAM or FM radio Station

1.Press the Memory Up/Down Buttons on the remote or the Preset Buttons on the unit to cycle through saved AM or FM radio stations.

Radio & Misc. Operations

██ Using theAuxiliary Input

1.Connect an MP3 player or other audio source to the Auxiliary Input on the back of the unit.

Requires a 3.5mm Line-Input Cable. (not included)

2.Press the Power Button to turn the unit on.

3.Press the Source Button to switch the unit to Auxiliary Mode.

•Use the native controls on the MP3 player or other audio source to control playback options.

•Use the volume controls on the unit to control the volume.

7

8

9

10

11

12

13

14

01.ClockAdjust/Sleep Button

Press the Clock Adjust Button to adjust the unit’s clock.

Press the Sleep Button to adjust the unit’s sleep timer. (90, 80, 70, 60, 50, 40, 30, 20, or 10 minutes)

02.Source Button

Press the Source Button to switch between the unit’s different modes.

iPod Mode, Radio Mode, or Aux Mode

03.AM/FM/Stop Button

Press the AM/FM Button to switch between AM and FM radio when in Radio Mode.

Press the Stop Button to stop a docked iPod while playing.

04.Hour/Minute/Tune Buttons

Press the Hour/Minute Buttons to adjust the hour and minute when setting the clock or alarms.

Press the Tune Buttons to adjust the AM and FM radio station when in Radio Mode.

Press and hold the Tune Buttons to scan for the next available AM or FM radio station.

Press the Tune Buttons to skip between songs on a docked iPod when in iPod Mode.

Press and hold the Tune Buttons to search within an individual track on a docked iPod when in iPod Mode.

05.Power/Alarm Off Button

Press the Power Button to turn the unit off and on.

Press the Alarm Off Button to turn the alarm off after it has sounded.

06. DC Power Input

ControlGlossary

07.EQ/Display Button

Press the EQ Button to switch between the unit’s preset equalizer settings. (Classic, Rock, Pop, and Jazz)

Press and hold the Display Button to view the time when in Radio Mode.

08.Time Zone/Preset Button

Press the Time Zone Button to adjust the unit’s currently set time zone.

Press the Preset Button to save the current AM or FM radio station to the unit’s memory.

09.Preset/Alarm Buttons

Press the Preset Buttons to cycle through saved AM and FM radio stations.

Press the Alarm Buttons to set alarm 1 or alarm 2, and to activate or deactivate alarm 1 or alarm 2.

10.Volume Buttons

11.Snooze/Dimmer Button

Press the Snooze Button, after the alarm has sounded, to delay the alarm for an additional 9 minutes.

Press the Dimmer Button to adjust the brightness of the display.

12.Auxiliary Input

Use the Auxiliary Input to connect an MP3 Player or other audio source to the unit.

13.AMAntenna Connection & FM Wire Antenna

Use the AM Antenna Connection to connect the included AM Loop Antenna to the unit.

14.DST Button

Press the DST Button to turn Daylight Savings Time off or on.

Controls

12

15.Power/Alarm Off Button

Press the Power Button to turn the unit off and on.

Press the Alarm Off Button to turn the alarm off after it has sounded.

16.Auxiliary Button

Press the Auxiliary Button to switch to Auxiliary Mode. When activated, the unit will output audio from the audio source connected to the Auxiliary Input.

17.Alarm 1 Button

With the unit powered off, press and hold the Alarm 1 Button to set alarm 1.

With the unit powered off, press the Alarm 1 Button to activate or deactivate alarm 1.

18.Repeat Button

Press the Repeat Button to repeat the current track, album, or playlist.

Press Once: Repeat current track. Press Twice: Repeat album or playlist.

19.Alarm 2 Button

With the unit powered off, press and hold the Alarm 2 Button to set alarm 2.

With the unit powered off, press the Alarm 2 Button to activate or deactivate alarm 2.

20.Play/Pause/FM St. Button

Press the Play and Pause Button to play or pause a docked iPod.

In Radio Mode press the FM St. Button to turn FM Stereo Mode off and on.

21.Memory Button

Press the Memory Button to save the current FM or AM radio station to the unit’s memory.

ControlGlossary

22.Time Zone Button

Press the Time Zone Button to adjust the currently set time zone.

See the Operations on setting the time for detailed instructions on using the Time Zone Button.

23.Sleep Button

Press the Sleep Button to adjust the unit’s sleep timer. (90, 80, 70, 60, 50, 40, 30, 20, or 10 minutes)

24.EQ Button

Press the EQ Button to switch between the unit’s preset equalizer settings. (Classic, Rock, Pop, and Jazz)

25.Display Button

Press and hold the Display Button to view the time when in Radio Mode.

26.Mute Button

Press the Mute Button to decrease the unit’s volume completely.

27.Radio Button

Press the Radio Button to switch to Radio Mode. When activated, the unit can be switched between AM and FM radio modes.

28.iPod Button

Press the iPod Button to switch to iPod Mode. When activated, the unit will amplify audio from a docked iPod or iPhone.

29.Menu Button

Press the Menu Button to go to the previous menu on a docked iPod/iPhone.

This button works exactly like the “Menu” button on an iPod.

Controls

14

ControlGlossary

30.Skip/Search Buttons

Press the Skip/Search Buttons to skip tracks on a docked iPod/iPhone.

Press and hold the Skip/Search Buttons to search through an individual track on a docked iPod/iPhone.

Menu Up/Down Buttons

Press the Menu Up/Down Buttons to navigate through the menus on a docked iPod/iPhone.

Select Buttons

Press the Select Button to make a selection on a docked iPod/iPhone.

The Select Button functions exactly like the select button on an iPod.

31.Stop/AM/FM Button

Press the Stop Button to stop an iPod during play.

Press the AM/FM Button to switch between AM and FM radio modes on a docked iPod.

32.Volume Buttons

Press the Volume Buttons to adjust the unit’s volume.

33.Memory Up/Down Buttons

Press the Memory Up/Down Buttons to cycle through AM and FM radio stations that have been saved to the unit’s memory.

34.Snooze/Dimmer

Press the Snooze Button, after the alarm has sounded, to delay the alarm for an additional 9 minutes.

Press the Dimmer Button to adjust the brightness of the display.

COMPANY INFORMATION

██internationalsupport

To download this User’s Guide in English, Spanish, or French, visit the support section at www.ilive.net.

Para transferir esta guía de usuario en inglés, español, o francés, visite la sección de la ayuda en www.ilive.net.

Pour télécharger ce guide de l’utilisateur en anglais, espagnol, ou français, visitez la section de soutien chez www.ilive.net.

██Service information

Address: 2116 Carr Street, St. Louis MO, 63106 Phone: 1-314-621-2881

Fax: 1-314-588-1805

User Manual Ilive Clock Radio For Ipod And Iphone Ipb101b Price

Email: customerservice@ilive.net Parts Email: partsinfo@dpi-global.com Website: www.ilive.net

User Manual Ilive Clock Radio For Ipod And Iphone Ipb101b Free

© 2009 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specifications are subject to change without notice