1. Mighty Mule Gate Opener 360 Manual
2. Mighty Mule Gate Opener Manual 350
3. Mighty Mule 500 Gate Opener Problems
4. Mighty Mule Gate Openers
5. Mighty Mule Gate Opener Troubleshooting …

• Wiring the Lock to Mighty Mule PRO-SW2000XL, PRO-SW3000XL, and PRO-SW4000XL Gate Opener Control Boards. Place a dab of petroleum jelly on the terminal contacts to prevent corrosion. Wiring the Lock to Gate Opener Control Boards MM500/502, PRO-SW3000, PRO-SW4000 Step 1.
• Instructions on gate opener safety and proper use of the gate opener. Thank you for purchasing a Mighty Mule® 350 E-Z Gate Opener—GTO's 'do-it-yourself' automatic gate opener! When correctly installed and properly used, your Mighty Mule® E-Z Gate Opener will give you many years of reliable service.

Mighty Mule MM362-D User Manual. Troubleshooting guide. Mighty Mule Safety. Manuals Directory ManualsDir.com - online owner manuals library. If your gate opener does not function properly, use this guide or use the online troubleshooter at.

24

Mighty Mule 362-D Installation Instructions

rev 07/19/11

Troubleshooting Guide

If your gate opener does not function properly, use this guide or use the online troubleshooter at

http://support.gtoinc.com before calling the GTO Service Department.

VISUAL AND AUDIBLE DIAGNOSTIC INDICATORS
1. Visual Indicators:
a. Power LED (Green):

• ON: AC power or Solar power is present.

• OFF: There is no input power.

Mighty Mule Gate Opener 360 Manual

b. Status LED (Yellow): (while unit is running this LED will be OFF)

• Rapid blinking in random pattern: GTO’s transmitter 318 MHz signal is detected.

Mighty Mule Gate Opener Manual 350

• Continuously ON: Battery is in fast charge mode.

• 1 Blink every 2 seconds: Battery is in float charge mode (battery is fully charged)

• OFF: Switch is in the OFF position or there is no input power for at least 60 seconds.

2. AUDIBLE INDICATOR (ALARM/BUZZER):
a. Beeps upon power up:

• This is normal self test when the unit is turned on.

b. Continuous beep after power up:

Mighty Mule 500 Gate Opener Problems

• Unit has learned new transmitter code, releasing the transmitter button will shut off

the alarm or…

Mighty Mule Gate Openers

• Unit has entered ‘LEARN LIMIT’ mode, releasing the transmitter button will shut off the alarm.

c. Rapid beeping:

• Unit has encountered two (2) obstructions without reaching either limit. (Power cycle to reset the alarm)

• Transmitter will not operate the gate.

• Alarm will automatically shut off after 5 minutes; gate will remain disabled until control box is restarted.

d. 1 beep every 20 seconds:

• Low battery is detected.

e. 1 beep every 2 second:

• Position sensor is open circuit. Call GTO Service department.

f. 2 beeps every 2 second:

• Position sensor is short circuit. Call GTO Service department.

g. 1 beep when attempting to activate the opener:

• Blown fuse. Genesis blood mixer.

• Battery is extremely low or damaged.

• Loose connection from battery to circuit board.

3. IF THE GATE STOPS AND REVERSES DIRECTION

1. Check the position of the mounting brackets and readjust if necessary.

2. Check the gate for binding or hinge damage.

Mighty Mule Gate Opener Troubleshooting …

3. Adjust stall force if necessary.

4. Reprogram closed position limits.