Matlab Simulink Hdl Coder 1 User's Manual

Posted on by
  1. Matlab Simulink Hdl Coder 1 User's Manual Online
  2. Matlab Hdl Coder Examples
  3. Matlab Simulink Coder
  4. Matlab Simulink Hdl Coder 1 User's Manual Pdf
  5. Matlab Simulink Hdl Coder 1 User's Manual Software
  6. Matlab Hdl Coder Tutorial
  7. Medical Coder 1

FPGA Programming and Configuration

This example shows how to implement a Simulink® algorithm on a Speedgoat FPGA I/O board by using HDL Workflow Advisor to:

– Challenges of manual translation – MATLAB Coder Workflow for generating code Accelerating Algorithm Execution HDL Coder - MATLAB to HDL Flow – Why translate MATLAB to HDL? – Challenges of manual translation – HDL Coder Workflow for generating code Q&A. I am building a model using Simulink / Matlab Embedded Coder which is then converted to VHDL through HDL Coder. It should behave slightly different in simulation versus HDL, in particular concerning. First 25 Users Free. Distinguish between simulation and HDL code generation in simulink. Ask Question Asked 6 years, 1 month ago. I am building a model using Simulink / Matlab Embedded Coder which is then converted to VHDL through HDL Coder. It should behave slightly different in simulation versus HDL, in particular concerning debug-output. Is there a programmatic way to distinguish which target is selected? HDL Code Generation for Any Target. Use high-level synthesis techniques to compile hardware-ready MATLAB or Simulink to readable, traceable, and synthesizable VHDL or Verilog HDL code. This code is optimized and portable across any FPGA, ASIC, or SoC hardware. You can produce high-quality HDL code regardless of your hardware design experience. Apr 17, 2013 I have designed a sine pwm model in the simulink using sine-sawtooth waveform comparison method. The model working perfectly in the simulink. I have converted the same to verilog code using HDL coder(ver 2.1).

  1. Specify an FPGA board and its I/O interface.

  2. Synthesize the Simulink algorithm for FPGA programming.

  3. Generate a Simulink® Real-Time™ interface subsystem model.

The interface subsystem model contains blocks to program the FPGA and communicate with the FPGA I/O board during real-time application execution. You add the generated subsystem to your Simulink Real-Time domain model.

The entire workflow looks like this figure.

This example uses the Speedgoat IO331. You can use any FPGA I/O module supported by Simulink Real-Time and HDL Coder that meets the speed, size, and pinout requirements of the model.

Requirements and Preconditions

HDL Coder™

Before you start, complete an FPGA subsystem plan.

For the IO331 board, HDL Workflow Advisor requires the Xilinx® ISE toolset. To install this toolset, in the Command Window, type:

hdlsetuptoolpath('ToolName', 'Xilinx ISE', 'ToolPath', toolpath)

where toolpath is the full path to the synthesis tool executable.

For the toolset requirements of other boards, see Supported Third-Party Tools and Hardware (HDL Coder).

Step 1. Simulink Domain Model

The Simulink FPGA domain model contains a subsystem (algorithm) to be programmed onto the FPGA chip. Using this model, you can test your FPGA algorithm in a simulation environment before you download the algorithm to an FPGA board.

  1. Create a Simulink model that contains the algorithm that you want to load onto the FPGA, in this case a loopback test.

  2. Place the algorithm to be programmed on the FPGA inside a Subsystem block. The model can include other blocks and subsystems for testing. However, one subsystem must contain the FPGA algorithm.

  3. Set or confirm the subsystem inport and outport names and data types. The HDL Coder HDL Workflow Advisor uses these settings for routing and mapping algorithm signals to I/O connector channels.

  4. Save the model.

This model is your FPGA domain model. It represents the simulation sample rate of the clock on your FPGA board. For example, the Speedgoat IO331 has an onboard 125 MHz clock. One second of simulation equals 125e6 iterations of the model.

For an example of an FPGA domain model, see dslrtSGFPGAloopback_fpga. The ServoSystem subsystem contains the FPGA algorithm.

User

Step 2. FPGA Target Configuration

This procedure uses the dslrtSGFPGAloopback_fpga example. You must have already created an FPGA subsystem (algorithm) in an FPGA domain model and developed an FPGA subsystem plan.

  1. Open the FPGA domain model dslrtSGFPGAloopback_fpga.

  2. In the FPGA model, right-click the FPGA subsystem (ServoSystem). From the context menu, select HDL Code > HDL Workflow Advisor. The HDL Workflow Advisor dialog box displays several tasks for the subsystem. Address only your required subset of the tasks.

  3. Expand the Set Target folder and select task 1.1 Set Target Device and Synthesis Tool.

  4. Set Target Workflow to Simulink Real-Time FPGA I/O.

  5. From the Target platform list, select the Speedgoat FPGA I/O board installed in your Speedgoat target machine, in this case the Speedgoat IO331. Check that HDL Workflow advisor sets the synthesis tool to the Xilinx® ISE Design Suite.

  6. Click Run This Task.

Step 3. FPGA Target Interface Configuration

You must have already configured the FPGA target.

  1. In the Set Target folder, select task 1.2 Set Target Interface.

  2. In the Processor/FPGA synchronization box, select Free running.

  3. For signals hwIn and hwOut, in the Target Platform Interfaces column, select LVCMOS I/O Channel [0:63]. In the Bit Range/Address/FPGA Pin column, enter the channel value for each signal, or take the defaults.

  4. For signals pciRead and pciWrite, in the Target Platform Interfaces column, select PCI Interface. In the Bit Range/Address/FPGA Pin column, use the automatically generated values. Do not enter PCI address values.

  5. Click Run This Task.

Step 4. FPGA Target Frequency Configuration

You must have already configured the FPGA target interface.

  1. In the Set Target folder, select task 1.3 Set Target Frequency (optional). The Set Target Frequency pane contains fields showing the FPGA input clock frequency (fixed) and the FPGA system clock frequency. The FPGA system clock frequency defaults to the FPGA input clock frequency.

  2. To specify a different system clock frequency (for example, 50 MHz), type the new value in the field FPGA system clock frequency (MHz). For the permitted range for the system clock rate, see the Speedgoat board characteristics table. The system sometimes sets a value different from the one you specified.

  3. Click Run This Task.

Step 5. Simulink Real-Time Interface Subsystem Generation

This procedure generates an interface subsystem file for the dxpcSGFPGAloopback_fpga example.

Assign distinct names to blocks that contain different HDL code. The name of the interface subsystem file is derived directly from the block name. If two blocks containing different HDL code have the same name, the names collide and one of the blocks gets the wrong code.

You must have already configured the FPGA target interface and the required target frequency. If you have specified vector inports or outports, you must have already selected the Scalarize vector ports check box. This check box is on the Coding style tab of node Global Settings, under node HDL Code Generation in the Configuration Parameters dialog box.

  1. Expand the Download to Target folder, and right-click task 5.2 Generate Simulink Real-Time Interface.

  2. In this pane, click Run To Selected Task.

This action:

  • Runs the remaining tasks.

  • Creates the FPGA bitstream file in the hdlsrc folder. The Simulink Real-Time interface subsystem references this bitstream file during the build and download process.

  • Generates a model named gm_dslrtSGFPGAloopback_fpga_slrt, which contains the Simulink Real-Time interface subsystem.

Here is an example of the HDL Coder HDL Workflow Advisor after this action.

The generated interface subsystem looks like this figure.

This generated model contains a masked subsystem with the same name as the subsystem in the Simulink FPGA domain model. Although the appearance is similar, this subsystem does not contain the Simulink algorithm. Instead, the algorithm is implemented in an FPGA bitstream. You reference and load this algorithm into the FPGA from this subsystem.

Step 6. Simulink Real-Time Domain Model

Using the Simulink Real-Time software, transform a Simulink or Stateflow® domain model into a Simulink Real-Time domain model and execute it on a Speedgoat target machine for real-time testing applications. After creating a Speedgoat FPGA interface subsystem. You can then include the FPGA board in your Simulink Real-Time domain model by inserting the interface subsystem.

  1. Create a Simulink Real-Time domain model with the functionality that you want to simulate with the FPGA algorithm. Leave the inports and outports of the FPGA subsystem disconnected.

  2. Save the model.

Matlab Hdl Coder Examples

Guidelines for reporting health research a user's manual. The Simulink Real-Time domain model looks like this figure. See example model dslrtSGFPGAloopback_slrt.

Step 7. Simulink Real-Time Interface Subsystem Integration

In the Simulink Real-Time interface subsystem mask, set three parameters:

  • Device index

  • PCI slot

  • Sample time

Matlab simulink training

To integrate the interface subsystem:

  1. In the Simulink editor, open gm_dslrtSGFPGAloopback_fpga_slrt.

  2. Copy the Simulink Real-Time interface subsystem and paste it into the Simulink Real-Time domain model.

  3. Save or discard gm_dslrtSGFPGAloopback_fpga_slrt. You can recreate it as required using the HDL Coder HDL Workflow Advisor.

  4. In the domain model, connect signals to the inports and outports of the interface subsystem.

  5. Set the block parameters according to the FPGA I/O boards in your Speedgoat target machine.

  • If you have a single FPGA I/O board, leave the device index and PCI slot at the default values. You can set the sample time or leave it at –1 for inheritance.

  • If you have multiple FPGA I/O boards, give each board a unique device index.

  • If you have two or more boards of the same type (for example, two Speedgoat IO331 boards), specify the PCI slot ([bus, slot]) for each board. Get this information with the SimulinkRealTime.target.getPCIInfo function.

6 Save the model.

The updated Simulink Real-Time domain model looks like this figure. See example model dslrtSGFPGAloopback_slrt_wiss.

Step 8. Real-Time Application Execution

To do this procedure, you must have already created a Simulink Real-Time domain model that includes a Simulink Real-Time interface subsystem generated from the HDL Coder HDL Workflow Advisor.

  1. Configure the Speedgoat target machine and connect it to the development computer.

  2. Build and download the Simulink Real-Time application. The real-time application loads onto the Speedgoat target machine and the FPGA algorithm bitstream loads onto the FPGA.

  3. If you are using I/O lines (channels), confirm that you have connected the lines to the external hardware under test.

The start and stop of the Simulink Real-Time model controls the start and stop of the FPGA algorithm. The FPGA algorithm executes at the clock frequency of the FPGA I/ O board, while the real-time application executes in accordance with the model sample time.

Matlab Hdl Coder Tutorial

Related Topics

Medical Coder 1

I understood your reply about Matrix Multiplication, but it is not totally clear to me. I've read the manual, and there it says that matrix is allowed. It seems the restriction is that matrix format is not permitted as an input/output in the design top level. Isn't it? I tested it, and I got a HDL code with a sort of for loop responsible for doing the multiplication. In the matlab code, I implemented a function with vectors as parameters. Then, I concatenated them and executed the direct multiplication. I reassigned the multiplication result to output vectors.