Assembly Instructions

• Life Fitness 97ti Treadmill Service Manual
• Life Fitness
• Life Fitness 97ti Treadmill User Manual Instructions
• Life Fitness 97ti Treadmill User Manual Pdf
• Life Fitness 97ti Treadmill Manual

Congratulations..

and welcome to the world of

The Integrity Series builds on 25 years of engineering and design knowledge. Treadmills, elliptical cross-trainers, recumbent and upright Lifecycle exercise bikes and climbers are built to be reliable, effective, aesthetically pleasing and inviting for any exerciser. Read online or download PDF. Page 20 / 54. Life Fitness 95Ti User Manual. Life Fitness Sports and recreation. Manuals Directory ManualsDir.com - online owner manuals library. The Life Fitness Treadmill is equipped with Polar® telemetry. (15 mph on the 97Ti. View online Service manual for Life Fitness 95Ti Treadmill or simply click Download button to examine the Life Fitness 95Ti guidelines offline on your desktop or laptop computer. Life Fitness 93T, Life Fitness 95Te, Life Fitness 97TE, Life Fitness 97Ti. Life Fitness MTSBC User Manual Parts list (13 pages). Life Fitness is dedicated to providing the best customer support in the industry. We're here to work with you. Life Fitness Service Solutions Life Fitness - service-solutions. ETUP Read the Operation Manual before setting up the Life Fitness Treadmill. Place the treadmill where it will be used before beginning the setup procedure. LECTRICAL OWER EQUIREMENTS The Life Fitness Treadmill requires a dedicated. line with isolated neutral according to the electrical configurations listed in the chart below. Life Fitness Model 97Ti, 95Ti, 93T, 97Te, and 95Te Treadmills ELECTRONIC OVERVIEW – SMART STOP PCB Functional Description ( 97Ti and 95Ti) The Smart Stop PCB is designed to sense the presence of a user on the treadmill deck and reset the treadmill if a user is not detected.

COMMERCIAL TREADMILLS. More than 500,000 Life Fitness treadmills have been created since 1991. Our treadmills for commercial gyms have a reputation for reliability and comfort. The FlexDeck Shock Absorption System, reduces stress and provides an effective cardio workout suited for exercisers of all fitness levels.

The following Parts Identification Listing and the step by step assembly procedures have been assembled to make the set-up of this treadmill as quick and easy as possible.

Please take special note of the following important points prior to choosing a location and beginning assembly of the treadmill…

IMPORTANT SAFETY INSTRUCTIONS !

DO NOT position the rear of the treadmill within 6 feet ( 2 meters ) of the nearest obstruction. The sides of the treadmill should maintain a minimum clearance of 8 inches ( 20 cm ) from the nearest treadmill or other obstruction.

DO NOT locate the treadmill outdoors, near swimming pools, or in areas of high humidity.

DO verify the contents of the delivery carton against the accompanying parts listing prior to setting the cartons and shipping material aside. If any parts are missing, contact Life Fitness Customer Support Services at the number listed on the back page of this assembly instruction booklet.

Save the shipping cartons in case of return.

DO read the entire Operation Manual prior to attempting to operate this machine, as this is essential for proper use. The Manual explains how to properly use the treadmill and helps you to train your staff effectively.

NE placez PAS l’arrière du tapis roulant dans un rayon de 2 m (6 pi) de l’obstruction la plus proche. Les côtés de l’appareil ne doivent pas se trouver à moins de 20 cm (8 po) du tapis roulant voisin ou de toute autre obstruction.

NE placez PAS le tapis roulant à l’extérieur, près d’une piscine ou dans des endroits très humides.

VÉRIFIEZ si l’emballage contient toutes les pièces de la liste jointe avant de le mettre de côté. Si des pièces sont absentes, contactez l’assistance clientèle de Life Fitness au numéro indiqué au dos de cette brochure d’instruction de montage..

VÉRIFIEZ si l’emballage contient toutes les pièces de la liste jointe avant de le mettre de côté. Si des pièces sont absentes, contactez l’assistance clientèle de Life Fitness au numéro indiqué au dos de cette brochure d’instruction de montage.

TOOLS REQUIRED FOR ASSEMBLY..

Phillips screwdriver, Torx wrench, 3/4” combination wrench, flat blade screwdriver (or 5/16” nut driver)

PARTS DESCRIPTION

IMPORTANT!

DO NOT DISCARD THE SHIP KIT LOCATED ON TOP OF THE DECK AND BELT. ALL NECESSARY COMPONENTS

NEEDED TO COMPLETE THE INSTALLATION ARE LOCATED IN THE SHIP KIT.

IMPORTANT!

NE JETEZ PAS LE KIT D’EXPÉDITION PLACÉ SUR LE DESSUS DU PLATEAU ET SUR LE TAPIS. IL CONTIENT TOUS LES

ÉLÉMENTS NÉCESSAIRES POUR L’INSTALLATION.

1.Remove the four SCREWS (A) securing the FRONT GRILL (B) to the FRAME (C). Remove the FRONT GRILL and set it aside.

2.Remove the four SCREWS (D) securing the MOTOR COVER (E). Lift and remove the MOTOR COVER and set it aside.

3.Locate the LEFT UPRIGHT (#1). Lay the LEFT UPRIGHT across the belt and deck with the notched end near the LEFT UPRIGHT MOUNTING BRACKET (F).

4.Unwrap the MAIN WIRE HARNESS (G) leading from the LEFT UPRIGHT MOUNTING BRACKET (F). Feed the MAIN WIRE HARNESS through the LEFT UPRIGHT (#1). Carefully tilt the LEFT UPRIGHT upwards and position the notched end of the LEFT UPRIGHT over the LEFT UPRIGHT MOUNTING BRACKET. With the LEFT TOP MOUNTING PLATE (H) directed forward, slide the LEFT UPRIGHT down over the LEFT UPRIGHT MOUNTING BRACKET and pre-installed BOLT and WASHER until it rests on the FRAME (C). Secure the LEFT UPRIGHT to the LEFT UPRIGHT MOUNTING BRACKET using two BOLTS (#20) and WASHERS (#24). One BOLT and WASHER on the inside of the LEFT UPRIGHT and one BOLT and WASHER on the front side of the LEFT UPRIGHT. Leave the BOLTS loose at this time.

NOTE: BE CAREFUL NOT TO DAMAGE THE MAIN WIRE HARNESS (G) WHEN ROUTING IT THROUGH THE LEFT UPRIGHT (#1) OR WHEN SLIDING THE LEFT UPRIGHT OVER THE LEFT UPRIGHT MOUNTING BRACKET (F).

NOTE: BE SURE THE PRE-INSTALLED WASHER IS ON THE OUTSIDE OF THE LEFT UPRIGHT (#1) WHEN SLIDING IT DOWN TO REST ON THE FRAME (C).

5.Locate the RIGHT UPRIGHT (#2). With the RIGHT TOP MOUNTING PLATE (J) directed forward, slide the RIGHT UPRIGHT down over the RIGHT UPRIGHT MOUNTING BRACKET (K) and pre-installed BOLT and WASHER until it rests on the FRAME (C). Secure the RIGHT UPRIGHT to the RIGHT UPRIGHT MOUNTING BRACKET using two BOLTS (#20) and WASHERS (#24). One BOLT and WASHER on the inside of the RIGHT UPRIGHT and one BOLT and WASHER on the front side of the RIGHT UPRIGHT. Leave the BOLTS loose at this time.

NOTE: BE SURE THE PRE-INSTALLED WASHER IS ON THE OUTSIDE OF THE RIGHT UPRIGHT (#2) WHEN SLIDING IT DOWN TO REST ON THE FRAME (C).

6.(Model 93T Only) Locate both HANDLEBARS (#3). Slide one HANDLEBAR GROMMET (#27) over each HANDLEBAR. The groove of the HANDLEBAR GROMMET should face outward.

7.With the bend of one HANDLEBAR (#3) directed to the outside of the treadmill, insert the HANDLEBAR into the RIGHT UPRIGHT HANDLEBAR BRACKET (L) as shown. Be sure the HANDLEBAR MOUNTING HOLES are aligned. Repeat for the left side HANDLEBAR.

8.Locate the ERGO™ FRONT CROSSBAR (#4) and position the ERGO FRONT CROSSBAR with the plastic SMART STOP COVER (M) facing upward and forward as shown. Locate and slide the left and right INSIDE HANDLEBAR SHROUDS (#5 & #6) over the corresponding ends of the ERGO FRONT CROSSBAR as shown. Slide the left and right INSIDE HANDLEBAR SHROUDS towards the center of the ERGO FRONT CROSSBAR as shown.

Life Fitness 97ti Treadmill Service Manual

NOTE: BE CAREFUL NOT TO DAMAGE THE ANY WIRE HARNESSES THAT MAY BE LEADING FROM THE ENDS OF THE ERGO FRONT CROSSBAR (#4).

9.Install one FRONT CROSSBAR GROMMET (#26), rounded end first, over either end of the ERGO FRONT CROSSBAR (#4). Position the grommets just over the end brackets to meet the overmolding.

NOTE: BE CAREFUL NOT TO DAMAGE THE ANY WIRE HARNESSES THAT MAY BE LEADING FROM THE ENDS OF THE ERGO FRONT CROSSBAR (#4).

G

Sony dav-tz 200 user manual. Here you can view online or download Sony DAV-TZ100 / DAV-TZ200 / SS-WS96 Service Manual in pdf. Information contained in Sony DAV-TZ100 / DAV-TZ200 / SS-WS96 service manual ( repair manual) typically includes:. This Service Manual can help you recover, restore, fix, disassemble and repair Sony DAV-TZ100 / DAV-TZ200 / SS-WS96 Audio.

2

20 24

20 24

24

M 6 26

5

19 4

N 2

3 17

10.Position the right end of the ERGO FRONT CROSSBAR (#4) near the large access hole on the inside of the RIGHT UPRIGHT HANDLEBAR BRACKET (L).

Align the ERGO FRONT CROSSBAR MOUNTING HOLES with those in the RIGHT UPRIGHT HANDLEBAR BRACKET and secure using two BOLTS (#19), from the inside of the treadmill, and NUTS (#22). Tighten the BOLTS securely. Insert one SCREW (#16) from under the RIGHT UPRIGHT HANDLEBAR BRACKET. Tighten the SCREW securely.

11.Position the left end of the ERGO FRONT CROSSBAR (#4) near the large access hole on the inside of the LEFT UPRIGHT HANDLEBAR BRACKET (N).

(Models 97Ti and 95Ti Only) Feed the SMART STOP CABLE (O) and HEART RATE CABLE (P) into the access hole downward out the bottom of the LEFT UPRIGHT HANDLEBAR BRACKET.

Align the crossbar mounting holes with those in the LEFT UPRIGHT HANDLEBAR BRACKET and secure using two BOLTS (#19), from the inside of the treadmill, and NUTS (#22). Tighten the BOLTS securely. Insert one SCREW (#16) from under the LEFT UPRIGHT HANDLEBAR BRACKET. Tighten the SCREW securely.

NOTE: BE CAREFUL NOT TO PINCH THE SMART STOP CABLE (O) AND HEART RATE CABLE (P) (IF EQUIPPED) WHEN ASSEMBLING THE ERGO FRONT CROSSBAR (#4) TO THE LEFT UPRIGHT HANDLEBAR BRACKET.

(Models 97Ti and 95Ti Only) Feed the SMART STOP CABLE (O) and HEART RATE CABLE (P) upward through the top of the LEFT UPRIGHT (#1).

Life Fitness

12.Slide the LEFT INSIDE HANDLEBAR SHROUD (#5) near the LEFT UPRIGHT HANDLEBAR BRACKET (N).

(Model 93T Only) Position the HANDLEBAR GROMMET (#27) at the end of the LEFT INSIDE HANDLEBAR SHROUD. Install the HANDLEBAR GROMMET onto the inside edge of the LEFT INSIDE HANDLEBAR SHROUD as shown.

Locate and position the LEFT OUTSIDE HANDLEBAR SHROUD (#7) to match the LEFT INSIDE HANDLEBAR SHROUD.

(Model 93T Only) Install the remaining portion of the HANDLEBAR GROMMET onto the LEFT OUTSIDE HANDLEBAR SHROUD as it is positioned to match the LEFT INSIDE HANDLEBAR SHROUD.

Secure the SHROUDS together using three SCREWS (#15). Tighten the SCREWS securely. Do not overtighten the SCREWS. Repeat the procedure for the RIGHT INSIDE and OUTSIDE HANDLEBAR SHROUDS (#6 and #8).

13.Locate the DISPLAY CONSOLE (#9). Remove the eight SCREWS (Q) from the back of the DISPLAY CONSOLE and separate the front of the DISPLAY CONSOLE from the rear. Position the REAR CONSOLE (R) over the LEFT and RIGHT TOP MOUNTING PLATES (H & J) as shown. From the bottom of the LEFT and RIGHT TOP MOUNTING PLATES, secure the REAR CONSOLE using four screws (#17). Tighten the SCREWS securely. Do not overtighten the SCREWS.

20. Locate one SCREW GROMMET (#18). Insert the SCREW GROMMET into the square hole located above the top inside mounting bolt of the RIGHT UPRIGHT (#2). Repeat for the remaining SCREW GROMMET and LEFT UPRIGHT (#1)

21.Locate one LOWER UPRIGHT COVER (#10). Position the LOWER UPRIGHT COVER at the bottom notch of the RIGHT UPRIGHT (#2) making

and remaining UPRIGHT COVER.

22. Locate the UPRIGHT PLUGS (#25). Insert one UPRIGHT PLUG into each of the two access holes located on the lower outside of the LEFT and RIGHT UPRIGHTS (#1 & #2).

23. Locate and press the HANDLEBAR CAPS (#13) over the ends of the HANDLEBARS (#3). Be sure the HANDLEBAR CAPS are fully seated.

24. Using two SCREWS (#16) each, attach the two REAR FRAME END CAPS (#14) to the FRAME (C) as shown. Tighten the SCREWS securely. Do not overtighten the SCREWS.

13

14

PRE-OPERATION CHECKLIST

Ensure that all fasteners are tight.

Make sure the STRIDING BELT is properly tensioned and aligned according to the Operation Manual.

Check the operation of the STOP switch and tether switch assembly.

(See Operation Manual.)

Confirm the display console is set to English or Metric units. (See Optional Settings ENG/MET in Operation Manual.)

Refer to the Operation Manual for real time clock setting.

Read the entire Operation Manual before using the treadmill.

LISTE DES VÉRIFICATIONS À EFFECTUER AVANT LA MISE EN MARCHE

Vérifiez si tous les dispositifs de fixation sont serrés.

Assurez-vous que le TAPIS est bien tendu et aligné, conformément aux instructions du manuel d’utilisation.

Vérifiez le fonctionnement de l'interrupteur d'ARRÊT et reliez-le

(cf. Manuel de l'utilisateur).

Vérifiez si la console d’affichage est sur le système métrique ou anglais.

(Référez-vous aux réglages facultatifs relatifs aux systèmes de mesure dans le Manuel de l’utilisateur.)

Consultez le Manuel de l’utilisateur pour le réglage de l’horloge en temps réel.

Lisez le Manuel de l’utilisateur dans son intégralité avant d’utiliser le tapis roulant.

Before attempting to operate your Treadmill, it is imperative that you familiarize yourself with the contents of the Operation Manual. If your Life Fitness treadmill does not respond as described in the OPERATION MANUAL contact the nearest Life Fitness Service Center as listed in the OPERATION MANUAL.

Life Fitness Customer Support Services

(800) 351-3737 or (847) 451-0036

Prior to your call, please be sure you have located and noted the

MODEL NUMBER & SERIAL NUMBER.

The Model & Serial number information of your Life Fitness Treadmill is contained in a label located on the front of the unit.

©2004 Life Fitness, a division of Brunswick Corporation. All rights reserved. Life Fitness, Lifepulse, FlexDeck and Smart Stop are trademarks of Brunswick Corporation.

Polar is a registered trademark of Polar Electro, Inc. MO51-00K58-A181 09.04

37

5.2 C

ONFIGURATION

S

ETTINGS

CONFIGURATION FACTORY
SETTING

DEFAULT

The devices are part of the iPhone series and were announced on September 9, 2015. You can read or download here.iPhone 6s is smartphones designed and marketed. Iphone 6 plus user manual pdf download.

DESCRIPTION

LAN

GUAGE

ENGLISH

The language of the MESSAGE CENTER display. Choices
include English, German, French, Italian, Dutch, Spanish, Portugese,
and Turkish. Japanese available on units equipped with the Complex
Character Display (CCD) only.

MAXTIME SETUP

Life Fitness 97ti Treadmill User Manual Instructions

OFF

This feature enables fitness club managers to set workout
duration limits during peak and non-peak hours of club traffic.
If the setup is off, no duration limits are set. See the topic
titled Using the MaxTime

TM

Setup, which appears on the

following page.

STANDBY MODE SETUP

OFF

This feature enables fitness club managers to set periods at which the
treadmill automatically powers up or powers down. See the topic entitled
Using the Standby Setup, in this section.

ENGLISH/METRIC UNITS

ENGLISH

The measurement unit type for weight, distance, and speed.

CUSTOM WORKOUT ENTRY

N/A

See Programming Custom Workouts in Section 4.

TELEMETRY

ON

Switching on the telemetry feature makes it possible to use the
Polar®-compatible Heart Rate Zone Training exercise chest
strap for monitoring the heart rate.

SMART STOP

ON

This feature automatically pauses the workout if the user steps
off the belt.

MAXIMUM SPEED

12.0 (MPH) for 95Ti

This is the fastest speed at which the treadmill can operate.

15.0 (MPH) for 97Ti

MINIMUM SPEED

Life Fitness 97ti Treadmill User Manual Pdf

0.5 (MPH)

This is the slowest speed at which the treadmill can operate.

PAUSE TIMEOUT

1 (minute)

This is the maximum time during which a workout can remain
in pause mode.

WATTS DISPLAY

OFF (Int'l: ON)

If this option is enabled, the MESSAGE CENTER displays the
Watts equivalent of the step rate.

METS DISPLAY

OFF

If this option is enabled, the MESSAGE CENTER displays the
METs equivalent of the step rate.

PACE DISPLAY

ON

This feature displays the rate of minutes per mile.

CALORIE PER HOUR DISPLAY

ON (Int'l: OFF)

If this option is enabled, the MESSAGE CENTER displays the
number of calories burned per hour during the workout.

DISTANCE CLIMBED DISPLAY

OFF

The total distance climbed, based on the incline and speed of
the treadmill.

ACCELERATION RATE

3

The rate at which the treadmill accelerates to the selected speed,
ranging from 1 (slowest) to 5 (fastest).

DECELERATION RATE

3

The rate at which the treadmill decelerates to the selected speed,
ranging from 1 (slowest) to 5 (fastest).

ERASE CUSTOM WORKOUTS

N/A

This option erases all custom workouts in a single step.

MAXIMUM INCLINE

15.0

This option changes the maximum incline grade to a value
lower than 15 percent.

START MESSAGE SETUP

N/A

See “Using the START MESSAGE Setup” in this section.

QUICK START DISABLE

OFF

Use this option to disable or enable QUICK START workouts via the
numeric keys. See “Using QUICK START Disable” in this section.

FIT TEST PLUS

ON (Int'l: OFF)

Enable/Disable Fit Tests: Army PFT; Navy PRT; Marines PFT;
Gerkin protocol; PEB

MARATHON MODE

OFF

This option, if enabled, allows the user to workout indefinitely. See the topic
entitled Marathon Mode, in this section.

USER LANGUAGE SELECT

OFF

This option, if enabled, gives users the ability to select a language for
use during a workout. See the topic entitled User Language Select, in this
section.

Life Fitness 97ti Treadmill Manual